|
|
||
|
azienda | prodotti | applicazioni | novitā | documenti .PDF | mappa sito | contatti E-mail |
||
|
|
||
|
A
system of recording, simple,
compact and economic !!
The data logger FT-100/MV are a device with notable memory of recording and it are particularly suitable to document the variations of tension in the systems of cathode protection, settings and testing of apparatuses, monitoring of signals of process, etc.
Product
Specification Range
of measure: varying from
-5.00
volts to + 5.00 Volts Precision:
+ / - 0.010 Volts Serial
Number: univocal and not
eraseable inserted in the microprocessor.
Memory
given: Possibility to memorize 131.000
readings with date,
time and value of the tension
in
Volt. The
memorization of the data can be selected as circular type (the oldest data
come roll over) or to saturated memory. In this last case other readings
and the system are not saved anymore it is stopped.
Power
supply: Battery to the replaceable Litio easily. Lasted
battery: in operation of the interval of memorization and from the
qualification or less than the Leds.
Replacing the battery the data you/they are not canceled.
|
LED
Red: overcoming thresholds of alarm, with or without memory.
LED
Orange: signalling of battery in exhaustion or almost
discharge. Communication
with P.C.: Hands serial RS232 to nine pins
Temperature
of operation: from - 20 °Cs to + 75,0 °Cs
Case:
in IP-65 with transparent cover in polycarbonate and with external cable
for connection to junction-box. Dimensions: 65 mm. x 115 x 40 mm
Delay
Timer: Time of departure of the measures variable from 0
seconds thin to 1 month.
Interval
of recording: From 1 second to 4 hours to footsteps of a
second. The date of recording of the measures is acquired by the P.C.
during I unload him/it data periodic.
Threshold
of alarm of the highest or
least. Description: a line of 32 characters to point out the type of parameter and his/her use.
|
Software The
software of communication for Windows, furnished to outfit with the
recorder FT-100/MV, it allows of to mail the parameters and the data of
reference, to modify them, and besides, to unload all the data or the last
gives N. In every case the lines on which the data are memorized are lines
ASCII readable with any program of video writing. The Software
allows of to get some graphic representations from the memorized data
besides, to mail an offset of calibration and to check the state of the
FT-100/MV battery position. It
is possible to cancel the memory for then to proceed to other
memorizations and besides to save on lines the varied parameters of
configuration for then to take back them to program other devices
FT-100/MV.
|
